0
Your cart is empty. Go to Shop

(View Quote)

0
Your cart is empty. Go to Shop

(View Cart)

SKU : UAP-AC-IW-PRO

802.11ac 4×4 MIMO access point with 4-port Gigabit Ethernet switch for high-density environments. Fits into wall outlet.

The UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi app (iOS or AndroidTM), the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.

Features:

    • 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate), 2×2 MIMO on 2.4GHz (300Mbps max PHY rate)
    • 802.3af for base functionality. 802.3at required if using PoE passthrough
    • 1×4 (1 in, 4 out) switched Gigabit Ethernet ports with configurable PoE passthrough (port 1 only)
SKU : UAP-AC-IW-PRO

802.11ac 4×4 MIMO access point with 4-port Gigabit Ethernet switch for high-density environments. Fits into wall outlet.

The UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi app (iOS or AndroidTM), the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.

Features:

    • 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate), 2×2 MIMO on 2.4GHz (300Mbps max PHY rate)
    • 802.3af for base functionality. 802.3at required if using PoE passthrough
    • 1×4 (1 in, 4 out) switched Gigabit Ethernet ports with configurable PoE passthrough (port 1 only)
UAP-IW-HD
Dimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
Weight 210 g (7.41 oz)
Networking Interface (5) 10/100/1000 Ethernet Ports
Buttons Reset
Power Method 802.3af PoE
802.3at PoE+
Supported Voltage Range 44 to 57VDC
Power Supply UniFi Switch (PoE)
PoE Out 48V Passthrough (Pins +1, 2; -3, 6)
Power Save Supported
Beamforming Supported
Maximum Power Consumption
with PoE Passthrough
11W
23W (* Requires 802.3at PoE+ switch)
TX Power
2.4 GHz
5 GHz
23 dBm
26 dBm
Dual-Band Antennas (2) Single-Port, Single-Polarity Dual-Band Antennas, 2.4 GHz: 1.8 dBi Each, 5 GHz: 3.4 dBi Each
Single-Band Antennas (2) Single-Port, Dual-Polarity, Single-Band Antennas, 5 GHz: 6 dBi Each
Wi-Fi Standards 802.11 a/b/g/n/r/k/v/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
BSSID Up to 8 per Radio
Mounting 1-Gang Electrical Wall Box (Not Included)
Operating Temperature -10 to 60° C (14 to 140° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
ADVANCED TRAFFIC MANAGEMENT
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 200+
SUPPORTED DATA RATES (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
58 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2, VHT 160)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Description

Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.
  • Scalable. Dedicated Wi-Fi per room
  • Easy Setup, Monitoring, and Control
  • Fast. Two radios, 802.11ac
The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series (requires Cat5e or higher).

Versatile Data and PoE Output
  • An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
  • Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

 

Data Sheet - AC In-Wall Pro

Download